Inheritance diagram for MoreMountains.Feedbacks.MMF_Feedback:

Public Member Functions
virtual float	ComputeIntensity (float intensity, Vector3 position)
	Computes the new intensity, taking into account constant intensity and potential randomness More...

virtual void	CacheRequiresSetup ()

virtual bool	EvaluateRequiresSetup ()
	Override this method to determine if a feedback requires setup More...

virtual void	SetFeedbackDuration (float newDuration)
	Use this method to change the duration of this feedback More...

virtual void	PreInitialization (MMF_Player owner, int index)
	Runs at Awake, lets you preinitialize your custom feedback before Initialization More...

virtual void	Initialization (MMF_Player owner, int index)
	Typically runs on Start, Initializes the feedback and its timing related variables More...

virtual void	SetIndexInFeedbacksList (int index)
	Lets you specify at what index this feedback is in the list - use carefully (or don't use at all) More...

virtual void	AutomaticShakerSetup ()
	Call this method (either directly or via the inspector button) to try and automatically setup this feedback's corresponding shaker in the scene More...

virtual void	ForceAutomateTargetAcquisition ()
	Lets you force target acquisition, outside of initialization where it usually occurs More...

virtual void	Play (Vector3 position, float feedbacksIntensity=1.0f)
	Plays the feedback More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	Stop (Vector3 position, float feedbacksIntensity=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	SkipToTheEnd (Vector3 position, float feedbacksIntensity=1.0f)
	Called when skipping to the end of MMF_Player, calls custom Skip on all feedbacks More...

virtual void	ForceInitialValue (Vector3 position, float feedbacksIntensity=1.0f)
	Forces the feedback to set its initial value (behavior will change from feedback to feedback, but for example, a Position feedback that moves a Transform from point A to B would automatically move the Transform to point A when ForceInitialState is called More...

virtual void	RestoreInitialValues ()
	Called when restoring the initial state of a player, calls custom Restore on all feedbacks More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	ResetCooldown ()
	Resets the cooldown for this feedback, allowing it to be played again instantly More...

virtual void	PlayerComplete ()
	This gets called by the MMF Player when all feedbacks have completed playing More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

virtual void	ComputeNewRandomDurationMultiplier ()
	Computes a new random duration multiplier More...

virtual void	ResetPlayCount ()
	Resets the play count of this feedback More...

virtual void	ComputeTotalDuration ()
	Computes the total duration of this feedback More...

virtual void	InitializeCustomAttributes ()
	Use this method to initialize any custom attributes you may have More...

virtual void	OnValidate ()
	Triggered when a change happens in the inspector More...

virtual void	OnAddFeedback ()
	Triggered when the feedback gets added to the player More...

virtual void	OnDestroy ()
	Triggered when that feedback gets destroyed More...

virtual void	OnDisable ()
	Triggered when the host MMF Player gets disabled More...

virtual void	OnDrawGizmosSelectedHandler ()
	Triggered when the host MMF Player gets selected, can be used to draw gizmos More...

Public Attributes
bool	Active = true
	whether or not this feedback is active More...

int	UniqueID

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

string	OriginalLabel = ""
	the original label of this feedback, used to display next to the custom label in case we set one More...

MMChannelModes	ChannelMode = MMChannelModes.Int

int	Channel = 0
	the ID of the channel on which this feedback will communicate More...

MMChannel	MMChannelDefinition = null

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

virtual Color	DisplayColor => Color.black
	use this color to customize the background color of the feedback in the MMF_Player's list More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

MMFeedbackTargetAcquisition	AutomatedTargetAcquisition
	a set of settings letting you define automated target acquisition for this feedback, to (for example) automatically grab the target on this game object, or a parent, a child, or on a reference holder More...

bool	RandomizeOutput = false
	if this is true, intensity will be multiplied by a random value on play, picked between RandomMultiplier.x and RandomMultiplier.y More...

Vector2	RandomMultiplier = new Vector2(0.8f, 1f)
	a random value (randomized between its x and y) by which to multiply the output of this feedback, if RandomizeOutput is true More...

bool	RandomizeDuration = false
	if this is true, this feedback's duration will be multiplied by a random value on play, picked between RandomDurationMultiplier.x and RandomDurationMultiplier.y More...

Vector2	RandomDurationMultiplier = new Vector2(0.5f, 2f)
	a random value (randomized between its x and y) by which to multiply the duration of this feedback, if RandomizeDuration is true More...

bool	UseRange = false
	if this is true, only shakers within the specified range will respond to this feedback More...

float	RangeDistance = 5f
	when in UseRange mode, only shakers within that distance will respond to this feedback More...

bool	UseRangeFalloff = false
	when in UseRange mode, whether or not to modify the shake intensity based on the RangeFallOff curve More...

AnimationCurve	RangeFalloff = new AnimationCurve(new Keyframe(0f, 1f), new Keyframe(1f, 0f))
	the animation curve to use to define falloff (on the x 0 represents the range center, 1 represents the max distance to it) More...

Vector2	RemapRangeFalloff = new Vector2(0f, 1f)
	the values to remap the falloff curve's y axis' 0 and 1 More...

MMF_Button	AutomaticShakerSetupButton
	a button used to attempt an auto shaker setup for this feedback, adding whatever shaker it requires to function to the scene More...

MMF_Player	Owner
	the Owner of the feedback, as defined when calling the Initialization method More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

virtual IEnumerator	Pause => null
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause => false
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause => false
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	LooperStart => false
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	HasChannel => false
	if this is true, the Channel property will be displayed, otherwise it'll be hidden More...

virtual bool	HasAutomaticShakerSetup => false
	if this is true, this feedback will display an automatic shaker setup button More...

virtual bool	HasRandomness => false
	if this is true, the Randomness group will be displayed, otherwise it'll be hidden More...

virtual bool	CanForceInitialValue => false
	if this is true, this feedback implements ForceInitialState, otherwise calling that method will have no effect More...

virtual bool	ForceInitialValueDelayed => false
	if this is true, force initial value will happen over two frames More...

virtual bool	HasAutomatedTargetAcquisition => false
	whether or not this feedback can automatically grab the target on this game object, or a parent, a child, or on a reference holder More...

virtual bool	HasRange => false
	if this is true, the Range group will be displayed, otherwise it'll be hidden More...

virtual int	PlaysLeft => _playsLeft
	the total amount of plays this feedback has left More...

virtual bool	HasCustomInspectors => false

virtual bool	InCooldown
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

virtual float	ComputedRandomMultiplier
	Returns the random multiplier to apply to this feedback's output More...

virtual bool	RequiresSetup => _requiresSetup
	A flag used to determine if a feedback has all it needs, or if it requires some extra setup. This flag will be used to display a warning icon in the inspector if the feedback is not ready to be played. More...

virtual string	RequiredTarget => _requiredTarget

virtual bool	DrawGroupInspectors => true
	if this is true, group inspectors will be displayed within this feedback More...

virtual bool	DisplayFullHeaderColor => false
	if this is true, the feedback will be displayed in the MMF Player's list with a full color background, as opposed to just a small line on the left More...

virtual string	RequiresSetupText => "This feedback requires some additional setup."
	defines the setup text that will be displayed on the feedback, should setup be required More...

virtual string	RequiredTargetText => ""
	the text used to describe the required target More...

virtual string	RequiredTargetTextExtra => ""
	the text used to describe the required target, if more info is needed More...

virtual float	FeedbackStartedAt => Application.isPlaying ? _lastPlayTimestamp : -1f

virtual bool	FeedbackPlaying
	whether or not this feedback is playing right now More...

virtual MMChannelData	ChannelData => _channelData.Set(ChannelMode, Channel, MMChannelDefinition)
	a ChannelData object, ready to pass to an event More...

Static Public Attributes
const string	_randomnessGroupName = "Feedback Randomness"

const string	_rangeGroupName = "Feedback Range"

const string	_automaticSetupGroupName = "Automatic Setup"

Protected Member Functions
virtual void	AutomateTargetAcquisitionInternal ()
	Performs automated target acquisition, if needed More...

virtual void	AutomateTargetAcquisition ()
	A method meant to be implemented per feedback letting you specify what happens (usually setting a target) More...

virtual GameObject	FindAutomatedTargetGameObject ()

virtual T	FindAutomatedTarget< T > ()

virtual IEnumerator	PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Triggers delaying coroutines if needed More...

virtual void	TriggerCustomPlay (Vector3 position, float intensity)
	Triggers a custom play More...

virtual IEnumerator	InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	TriggerRepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)

virtual IEnumerator	SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual IEnumerator	ForceInitialValueDelayedCo (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to delay the Stop when forcing initial values (used mostly with shaker based feedbacks) More...

virtual float	ApplyTimeMultiplier (float duration)
	Applies the host MMFeedbacks' time multiplier to this feedback More...

virtual IEnumerator	WaitFor (float delay)
	Internal method used to wait for a duration, on scaled or unscaled time More...

virtual float	ApplyDirection (float normalizedTime)
	Returns a new value of the normalized time based on the current play direction of this feedback More...

virtual void	CustomInitialization (MMF_Player owner)
	This method describes all custom initialization processes the feedback requires, in addition to the main Initialization method More...

abstract void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets played More...

virtual void	CustomStopFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets stopped More...

virtual void	CustomSkipToTheEnd (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets skipped to the end More...

virtual void	CustomRestoreInitialValues ()
	This method describes what happens when the feedback gets restored More...

virtual void	CustomPlayerComplete ()
	This method describes what happens when the player this feedback belongs to completes playing More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Protected Attributes
float	_lastPlayTimestamp = -float.MaxValue

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

bool	_requiresSetup = false

string	_requiredTarget = ""

float	_randomDurationMultiplier = 1f

int	_sequenceTrackID = 0

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

MMChannelData	_channelData

float	_totalDuration = 0f

int	_indexInOwnerFeedbackList = 0

string	_requiredTargetTextCached = "."

string	_requiredTargetTextCachedExtra = ""

float	_repeatOffset = 0f

Properties
virtual bool	ScriptDrivenPause `[get, set]`
	if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...

virtual float	ScriptDrivenPauseAutoResume `[get, set]`
	if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...

virtual MMF_ReferenceHolder	ForcedReferenceHolder `[get, set]`
	when in forced reference mode, this will contain the forced reference holder that will be used (usually set by itself) More...

virtual bool	IsPlaying `[get, set]`
	if this is true, this feedback is currently playing More...

virtual TimescaleModes	ComputedTimescaleMode `[get]`
	Returns the timescale mode to use in logic, taking into account the one set at the feedback level and the player level More...

virtual bool	InScaledTimescaleMode `[get]`
	returns true if this feedback is in Scaled timescale mode, false otherwise More...

virtual float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

virtual float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

virtual float	TotalDuration `[get]`
	The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats) More...

virtual bool	IsExpanded `[get, set]`

virtual string	RequiredChannelText `[get]`

virtual float	FeedbackDuration `[get, set]`

virtual float?	FinalNormalizedTime `[get]`
	Returns the t value at which to evaluate a curve at the end of this feedback's play time More...

virtual bool	NormalPlayDirection `[get]`
	Returns true if this feedback should play normally, or false if it should play in rewind More...

virtual bool	ShouldPlayInThisSequenceDirection `[get]`
	Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...

Member Function Documentation

◆ ApplyDirection()

virtual float MoreMountains.Feedbacks.MMF_Feedback.ApplyDirection ( float normalizedTime )

protectedvirtual

Returns a new value of the normalized time based on the current play direction of this feedback

Parameters

normalizedTime

Returns

◆ ApplyTimeMultiplier()

virtual float MoreMountains.Feedbacks.MMF_Feedback.ApplyTimeMultiplier ( float duration )

protectedvirtual

Applies the host MMFeedbacks' time multiplier to this feedback

Parameters

duration

Returns

◆ AutomateTargetAcquisition()

virtual void MoreMountains.Feedbacks.MMF_Feedback.AutomateTargetAcquisition ( )

protectedvirtual

A method meant to be implemented per feedback letting you specify what happens (usually setting a target)

◆ AutomateTargetAcquisitionInternal()

virtual void MoreMountains.Feedbacks.MMF_Feedback.AutomateTargetAcquisitionInternal ( )

protectedvirtual

Performs automated target acquisition, if needed

◆ AutomaticShakerSetup()

virtual void MoreMountains.Feedbacks.MMF_Feedback.AutomaticShakerSetup ( )

virtual

Call this method (either directly or via the inspector button) to try and automatically setup this feedback's corresponding shaker in the scene

◆ CacheRequiresSetup()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CacheRequiresSetup ( )

virtual

◆ ComputeIntensity()

virtual float MoreMountains.Feedbacks.MMF_Feedback.ComputeIntensity	(	float	intensity,
		Vector3	position
	)

virtual

Computes the new intensity, taking into account constant intensity and potential randomness

Parameters

intensity

Returns

◆ ComputeNewRandomDurationMultiplier()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ComputeNewRandomDurationMultiplier ( )

virtual

Computes a new random duration multiplier

◆ ComputeTotalDuration()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ComputeTotalDuration ( )

virtual

Computes the total duration of this feedback

◆ CustomInitialization()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CustomInitialization ( MMF_Player owner )

protectedvirtual

This method describes all custom initialization processes the feedback requires, in addition to the main Initialization method

Parameters

owner

◆ CustomPlayerComplete()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CustomPlayerComplete ( )

protectedvirtual

This method describes what happens when the player this feedback belongs to completes playing

Reimplemented in MoreMountains.Feedbacks.MMF_SetActive.

◆ CustomPlayFeedback()

abstract void MoreMountains.Feedbacks.MMF_Feedback.CustomPlayFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedpure virtual

This method describes what happens when the feedback gets played

Parameters

position
feedbacksIntensity

◆ CustomReset()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CustomReset ( )

protectedvirtual

This method describes what happens when the feedback gets reset

Reimplemented in MoreMountains.Feedbacks.MMF_ParticlesInstantiation, MoreMountains.Feedbacks.MMF_Flicker, MoreMountains.Feedbacks.MMF_FloatController, MoreMountains.Feedbacks.MMF_SetActive, MoreMountains.Feedbacks.MMF_Particles, MoreMountains.Feedbacks.MMF_Enable, MoreMountains.Feedbacks.MMF_Looper, and MoreMountains.Feedbacks.MMF_Events.

◆ CustomRestoreInitialValues()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CustomRestoreInitialValues ( )

protectedvirtual

This method describes what happens when the feedback gets restored

◆ CustomSkipToTheEnd()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CustomSkipToTheEnd	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

This method describes what happens when the feedback gets skipped to the end

Parameters

position
feedbacksIntensity

Reimplemented in MoreMountains.Feedbacks.MMF_PositionSpring, MoreMountains.Feedbacks.MMF_SquashAndStretchSpring, MoreMountains.Feedbacks.MMF_RotationSpring, MoreMountains.Feedbacks.MMF_ScaleSpring, MoreMountains.Feedbacks.MMF_SetActive, and MoreMountains.Feedbacks.MMF_PlayerChain.

◆ CustomStopFeedback()

virtual void MoreMountains.Feedbacks.MMF_Feedback.CustomStopFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

This method describes what happens when the feedback gets stopped

Parameters

position
feedbacksIntensity

◆ EvaluateRequiresSetup()

virtual bool MoreMountains.Feedbacks.MMF_Feedback.EvaluateRequiresSetup ( )

virtual

Override this method to determine if a feedback requires setup

Returns

◆ FindAutomatedTarget< T >()

virtual T MoreMountains.Feedbacks.MMF_Feedback.FindAutomatedTarget< T > ( )

protectedvirtual

Template Parameters

T

Returns

◆ FindAutomatedTargetGameObject()

virtual GameObject MoreMountains.Feedbacks.MMF_Feedback.FindAutomatedTargetGameObject ( )

protectedvirtual

Returns

◆ ForceAutomateTargetAcquisition()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ForceAutomateTargetAcquisition ( )

virtual

Lets you force target acquisition, outside of initialization where it usually occurs

◆ ForceInitialValue()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ForceInitialValue	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

virtual

Forces the feedback to set its initial value (behavior will change from feedback to feedback, but for example, a Position feedback that moves a Transform from point A to B would automatically move the Transform to point A when ForceInitialState is called

◆ ForceInitialValueDelayedCo()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.ForceInitialValueDelayedCo	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

A coroutine used to delay the Stop when forcing initial values (used mostly with shaker based feedbacks)

Parameters

position
feedbacksIntensity

Returns

◆ InfinitePlay()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.InfinitePlay	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

Internal coroutine used for repeated play without end

Parameters

position
feedbacksIntensity

Returns

◆ Initialization()

virtual void MoreMountains.Feedbacks.MMF_Feedback.Initialization	(	MMF_Player	owner,
		int	index
	)

virtual

Typically runs on Start, Initializes the feedback and its timing related variables

Parameters

owner

◆ InitializeCustomAttributes()

virtual void MoreMountains.Feedbacks.MMF_Feedback.InitializeCustomAttributes ( )

virtual

Use this method to initialize any custom attributes you may have

Reimplemented in MoreMountains.Feedbacks.MMF_MMSoundManagerSound, MoreMountains.Feedbacks.MMF_Sound, and MoreMountains.Feedbacks.MMF_Blink.

◆ OnAddFeedback()

virtual void MoreMountains.Feedbacks.MMF_Feedback.OnAddFeedback ( )

virtual

Triggered when the feedback gets added to the player

Reimplemented in MoreMountains.FeedbacksForThirdParty.MMF_CinemachineImpulse, and MoreMountains.Feedbacks.MMF_CanvasGroup.

◆ OnDestroy()

virtual void MoreMountains.Feedbacks.MMF_Feedback.OnDestroy ( )

virtual

Triggered when that feedback gets destroyed

◆ OnDisable()

virtual void MoreMountains.Feedbacks.MMF_Feedback.OnDisable ( )

virtual

Triggered when the host MMF Player gets disabled

Reimplemented in MoreMountains.Feedbacks.MMF_Position, MoreMountains.Feedbacks.MMF_Scale, MoreMountains.Feedbacks.MMF_Rotation, MoreMountains.Feedbacks.MMF_SquashAndStretch, MoreMountains.Feedbacks.MMF_SpriteRenderer, and MoreMountains.Feedbacks.MMF_RotatePositionAround.

◆ OnDrawGizmosSelectedHandler()

virtual void MoreMountains.Feedbacks.MMF_Feedback.OnDrawGizmosSelectedHandler ( )

virtual

Triggered when the host MMF Player gets selected, can be used to draw gizmos

Reimplemented in MoreMountains.Feedbacks.MMF_MMSoundManagerSound, and MoreMountains.FeedbacksForThirdParty.MMF_CinemachineImpulse.

◆ OnValidate()

virtual void MoreMountains.Feedbacks.MMF_Feedback.OnValidate ( )

virtual

Triggered when a change happens in the inspector

◆ Play()

virtual void MoreMountains.Feedbacks.MMF_Feedback.Play	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

virtual

Plays the feedback

Parameters

position
feedbacksIntensity

◆ PlayCoroutine()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.PlayCoroutine	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

An internal coroutine delaying the initial play of the feedback

Parameters

position
feedbacksIntensity

Returns

◆ PlayerComplete()

virtual void MoreMountains.Feedbacks.MMF_Feedback.PlayerComplete ( )

virtual

This gets called by the MMF Player when all feedbacks have completed playing

◆ PreInitialization()

virtual void MoreMountains.Feedbacks.MMF_Feedback.PreInitialization	(	MMF_Player	owner,
		int	index
	)

virtual

Runs at Awake, lets you preinitialize your custom feedback before Initialization

Parameters

owner
index

◆ RegularPlay()

virtual void MoreMountains.Feedbacks.MMF_Feedback.RegularPlay	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

Triggers delaying coroutines if needed

Parameters

position
feedbacksIntensity

◆ RepeatedPlay()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.RepeatedPlay	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

Internal coroutine used for repeated play

Parameters

position
feedbacksIntensity

Returns

◆ ResetCooldown()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ResetCooldown ( )

virtual

Resets the cooldown for this feedback, allowing it to be played again instantly

◆ ResetFeedback()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ResetFeedback ( )

virtual

Calls this feedback's custom reset

◆ ResetPlayCount()

virtual void MoreMountains.Feedbacks.MMF_Feedback.ResetPlayCount ( )

virtual

Resets the play count of this feedback

◆ RestoreInitialValues()

virtual void MoreMountains.Feedbacks.MMF_Feedback.RestoreInitialValues ( )

virtual

Called when restoring the initial state of a player, calls custom Restore on all feedbacks

Parameters

position
feedbacksIntensity

◆ SequenceCoroutine()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.SequenceCoroutine	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

A coroutine used to play this feedback on a sequence

Parameters

position
feedbacksIntensity

Returns

◆ SetDelayBetweenRepeats()

virtual void MoreMountains.Feedbacks.MMF_Feedback.SetDelayBetweenRepeats ( float delay )

virtual

Use this method to specify a new delay between repeats at runtime

Parameters

delay

◆ SetFeedbackDuration()

virtual void MoreMountains.Feedbacks.MMF_Feedback.SetFeedbackDuration ( float newDuration )

virtual

Use this method to change the duration of this feedback

Parameters

newDuration

◆ SetIndexInFeedbacksList()

virtual void MoreMountains.Feedbacks.MMF_Feedback.SetIndexInFeedbacksList ( int index )

virtual

Lets you specify at what index this feedback is in the list - use carefully (or don't use at all)

Parameters

index

◆ SetInitialDelay()

virtual void MoreMountains.Feedbacks.MMF_Feedback.SetInitialDelay ( float delay )

virtual

Use this method to specify a new initial delay at runtime

Parameters

delay

◆ SetSequence()

virtual void MoreMountains.Feedbacks.MMF_Feedback.SetSequence ( MMSequence newSequence )

virtual

Use this method to change this feedback's sequence at runtime

Parameters

newSequence

◆ SkipToTheEnd()

virtual void MoreMountains.Feedbacks.MMF_Feedback.SkipToTheEnd	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

virtual

Called when skipping to the end of MMF_Player, calls custom Skip on all feedbacks

Parameters

position
feedbacksIntensity

◆ Stop()

virtual void MoreMountains.Feedbacks.MMF_Feedback.Stop	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

virtual

Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations

Parameters

position
feedbacksIntensity

Reimplemented in MoreMountains.Feedbacks.MMF_AudioSource.

◆ TriggerCustomPlay()

virtual void MoreMountains.Feedbacks.MMF_Feedback.TriggerCustomPlay	(	Vector3	position,
		float	intensity
	)

protectedvirtual

Triggers a custom play

Parameters

position
intensity

◆ TriggerRepeatedPlay()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.TriggerRepeatedPlay	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

◆ WaitFor()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.WaitFor ( float delay )

protectedvirtual

Internal method used to wait for a duration, on scaled or unscaled time

Parameters

delay

Returns

Member Data Documentation

◆ _automaticSetupGroupName

const string MoreMountains.Feedbacks.MMF_Feedback._automaticSetupGroupName = "Automatic Setup"

static

◆ _beatInterval

float MoreMountains.Feedbacks.MMF_Feedback._beatInterval

protected

◆ _channelData

MMChannelData MoreMountains.Feedbacks.MMF_Feedback._channelData

protected

◆ _indexInOwnerFeedbackList

int MoreMountains.Feedbacks.MMF_Feedback._indexInOwnerFeedbackList = 0

protected

◆ _infinitePlayCoroutine

Coroutine MoreMountains.Feedbacks.MMF_Feedback._infinitePlayCoroutine

protected

◆ _initialized

bool MoreMountains.Feedbacks.MMF_Feedback._initialized = false

protected

◆ _lastPlayTimestamp

float MoreMountains.Feedbacks.MMF_Feedback._lastPlayTimestamp = -float.MaxValue

protected

◆ _playCoroutine

Coroutine MoreMountains.Feedbacks.MMF_Feedback._playCoroutine

protected

◆ _playsLeft

int MoreMountains.Feedbacks.MMF_Feedback._playsLeft

protected

◆ _randomDurationMultiplier

float MoreMountains.Feedbacks.MMF_Feedback._randomDurationMultiplier = 1f

protected

◆ _randomnessGroupName

const string MoreMountains.Feedbacks.MMF_Feedback._randomnessGroupName = "Feedback Randomness"

static

◆ _rangeGroupName

const string MoreMountains.Feedbacks.MMF_Feedback._rangeGroupName = "Feedback Range"

static

◆ _repeatedPlayCoroutine

Coroutine MoreMountains.Feedbacks.MMF_Feedback._repeatedPlayCoroutine

protected

◆ _repeatOffset

float MoreMountains.Feedbacks.MMF_Feedback._repeatOffset = 0f

protected

◆ _requiredTarget

string MoreMountains.Feedbacks.MMF_Feedback._requiredTarget = ""

protected

◆ _requiredTargetTextCached

string MoreMountains.Feedbacks.MMF_Feedback._requiredTargetTextCached = "."

protected

◆ _requiredTargetTextCachedExtra

string MoreMountains.Feedbacks.MMF_Feedback._requiredTargetTextCachedExtra = ""

protected

◆ _requiresSetup

bool MoreMountains.Feedbacks.MMF_Feedback._requiresSetup = false

protected

◆ _sequenceCoroutine

Coroutine MoreMountains.Feedbacks.MMF_Feedback._sequenceCoroutine

protected

◆ _sequenceTrackID

int MoreMountains.Feedbacks.MMF_Feedback._sequenceTrackID = 0

protected

◆ _totalDuration

float MoreMountains.Feedbacks.MMF_Feedback._totalDuration = 0f

protected

◆ Active

bool MoreMountains.Feedbacks.MMF_Feedback.Active = true

whether or not this feedback is active

◆ AutomatedTargetAcquisition

MMFeedbackTargetAcquisition MoreMountains.Feedbacks.MMF_Feedback.AutomatedTargetAcquisition

a set of settings letting you define automated target acquisition for this feedback, to (for example) automatically grab the target on this game object, or a parent, a child, or on a reference holder

◆ AutomaticShakerSetupButton

MMF_Button MoreMountains.Feedbacks.MMF_Feedback.AutomaticShakerSetupButton

a button used to attempt an auto shaker setup for this feedback, adding whatever shaker it requires to function to the scene

◆ BeatThisFrame

bool MoreMountains.Feedbacks.MMF_Feedback.BeatThisFrame = false

protected

◆ CanForceInitialValue

virtual bool MoreMountains.Feedbacks.MMF_Feedback.CanForceInitialValue => false

if this is true, this feedback implements ForceInitialState, otherwise calling that method will have no effect

◆ Chance

float MoreMountains.Feedbacks.MMF_Feedback.Chance = 100f

the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc)

◆ Channel

int MoreMountains.Feedbacks.MMF_Feedback.Channel = 0

the ID of the channel on which this feedback will communicate

◆ ChannelData

virtual MMChannelData MoreMountains.Feedbacks.MMF_Feedback.ChannelData => _channelData.Set(ChannelMode, Channel, MMChannelDefinition)

a ChannelData object, ready to pass to an event

◆ ChannelMode

MMChannelModes MoreMountains.Feedbacks.MMF_Feedback.ChannelMode = MMChannelModes.Int

whether to broadcast this feedback's message using an int or a scriptable object. Ints are simple to setup but can get messy and make it harder to remember what int corresponds to what. MMChannel scriptable objects require you to create them in advance, but come with a readable name and are more scalable

◆ ComputedRandomMultiplier

virtual float MoreMountains.Feedbacks.MMF_Feedback.ComputedRandomMultiplier

Initial value:

=>

RandomizeOutput ? Random.Range(RandomMultiplier.x, RandomMultiplier.y) : 1f

Returns the random multiplier to apply to this feedback's output

◆ CurrentSequenceIndex

int MoreMountains.Feedbacks.MMF_Feedback.CurrentSequenceIndex = 0

protected

◆ DebugActive

bool MoreMountains.Feedbacks.MMF_Feedback.DebugActive = false

whether or not this feedback is in debug mode

◆ DisplayColor

virtual Color MoreMountains.Feedbacks.MMF_Feedback.DisplayColor => Color.black

use this color to customize the background color of the feedback in the MMF_Player's list

◆ DisplayFullHeaderColor

virtual bool MoreMountains.Feedbacks.MMF_Feedback.DisplayFullHeaderColor => false

if this is true, the feedback will be displayed in the MMF Player's list with a full color background, as opposed to just a small line on the left

◆ DrawGroupInspectors

virtual bool MoreMountains.Feedbacks.MMF_Feedback.DrawGroupInspectors => true

if this is true, group inspectors will be displayed within this feedback

◆ FeedbackPlaying

virtual bool MoreMountains.Feedbacks.MMF_Feedback.FeedbackPlaying

Initial value:

=>

((FeedbackStartedAt > 0f) && (Time.time - FeedbackStartedAt < FeedbackDuration))

whether or not this feedback is playing right now

◆ FeedbackStartedAt

virtual float MoreMountains.Feedbacks.MMF_Feedback.FeedbackStartedAt => Application.isPlaying ? _lastPlayTimestamp : -1f

◆ ForceInitialValueDelayed

virtual bool MoreMountains.Feedbacks.MMF_Feedback.ForceInitialValueDelayed => false

if this is true, force initial value will happen over two frames

◆ HasAutomatedTargetAcquisition

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HasAutomatedTargetAcquisition => false

whether or not this feedback can automatically grab the target on this game object, or a parent, a child, or on a reference holder

◆ HasAutomaticShakerSetup

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HasAutomaticShakerSetup => false

if this is true, this feedback will display an automatic shaker setup button

◆ HasChannel

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HasChannel => false

if this is true, the Channel property will be displayed, otherwise it'll be hidden

◆ HasCustomInspectors

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HasCustomInspectors => false

◆ HasRandomness

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HasRandomness => false

if this is true, the Randomness group will be displayed, otherwise it'll be hidden

◆ HasRange

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HasRange => false

if this is true, the Range group will be displayed, otherwise it'll be hidden

◆ HoldingPause

virtual bool MoreMountains.Feedbacks.MMF_Feedback.HoldingPause => false

if this is true, this feedback will wait until all previous feedbacks have run

◆ InCooldown

virtual bool MoreMountains.Feedbacks.MMF_Feedback.InCooldown

Initial value:

=> (Timing.CooldownDuration > 0f) &&

(FeedbackTime - _lastPlayTimestamp < Timing.CooldownDuration)

returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise

an overridable color for your feedback, that can be redefined per feedback. White is the only reserved color, and the feedback will revert to normal (light or dark skin) when left to White

◆ Label

string MoreMountains.Feedbacks.MMF_Feedback.Label = "MMFeedback"

the name of this feedback to display in the inspector

◆ LastBeatIndex

int MoreMountains.Feedbacks.MMF_Feedback.LastBeatIndex = 0

protected

◆ LastBeatTimestamp

float MoreMountains.Feedbacks.MMF_Feedback.LastBeatTimestamp = 0f

protected

◆ LooperPause

virtual bool MoreMountains.Feedbacks.MMF_Feedback.LooperPause => false

if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again

◆ LooperStart

virtual bool MoreMountains.Feedbacks.MMF_Feedback.LooperStart => false

if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again

◆ MMChannelDefinition

MMChannel MoreMountains.Feedbacks.MMF_Feedback.MMChannelDefinition = null

the MMChannel definition asset to use to broadcast this feedback. The shaker will have to reference that same MMChannel definition to receive events - to create a MMChannel, right click anywhere in your project (usually in a Data folder) and go MoreMountains > MMChannel, then name it with some unique name

◆ OriginalLabel

string MoreMountains.Feedbacks.MMF_Feedback.OriginalLabel = ""

the original label of this feedback, used to display next to the custom label in case we set one

◆ Owner

MMF_Player MoreMountains.Feedbacks.MMF_Feedback.Owner

the Owner of the feedback, as defined when calling the Initialization method

◆ Pause

virtual IEnumerator MoreMountains.Feedbacks.MMF_Feedback.Pause => null

set this to true if your feedback should pause the execution of the feedback sequence

◆ PlaysLeft

virtual int MoreMountains.Feedbacks.MMF_Feedback.PlaysLeft => _playsLeft

the total amount of plays this feedback has left

◆ RandomDurationMultiplier

Vector2 MoreMountains.Feedbacks.MMF_Feedback.RandomDurationMultiplier = new Vector2(0.5f, 2f)

a random value (randomized between its x and y) by which to multiply the duration of this feedback, if RandomizeDuration is true

◆ RandomizeDuration

bool MoreMountains.Feedbacks.MMF_Feedback.RandomizeDuration = false

if this is true, this feedback's duration will be multiplied by a random value on play, picked between RandomDurationMultiplier.x and RandomDurationMultiplier.y

◆ RandomizeOutput

bool MoreMountains.Feedbacks.MMF_Feedback.RandomizeOutput = false

if this is true, intensity will be multiplied by a random value on play, picked between RandomMultiplier.x and RandomMultiplier.y

◆ RandomMultiplier

Vector2 MoreMountains.Feedbacks.MMF_Feedback.RandomMultiplier = new Vector2(0.8f, 1f)

a random value (randomized between its x and y) by which to multiply the output of this feedback, if RandomizeOutput is true

◆ RangeDistance

float MoreMountains.Feedbacks.MMF_Feedback.RangeDistance = 5f

when in UseRange mode, only shakers within that distance will respond to this feedback

◆ RangeFalloff

AnimationCurve MoreMountains.Feedbacks.MMF_Feedback.RangeFalloff = new AnimationCurve(new Keyframe(0f, 1f), new Keyframe(1f, 0f))

the animation curve to use to define falloff (on the x 0 represents the range center, 1 represents the max distance to it)

◆ RemapRangeFalloff

Vector2 MoreMountains.Feedbacks.MMF_Feedback.RemapRangeFalloff = new Vector2(0f, 1f)

the values to remap the falloff curve's y axis' 0 and 1

◆ RequiredTarget

virtual string MoreMountains.Feedbacks.MMF_Feedback.RequiredTarget => _requiredTarget

◆ RequiredTargetText

virtual string MoreMountains.Feedbacks.MMF_Feedback.RequiredTargetText => ""

the text used to describe the required target

◆ RequiredTargetTextExtra

virtual string MoreMountains.Feedbacks.MMF_Feedback.RequiredTargetTextExtra => ""

the text used to describe the required target, if more info is needed

◆ RequiresSetup

virtual bool MoreMountains.Feedbacks.MMF_Feedback.RequiresSetup => _requiresSetup

A flag used to determine if a feedback has all it needs, or if it requires some extra setup. This flag will be used to display a warning icon in the inspector if the feedback is not ready to be played.

◆ RequiresSetupText

virtual string MoreMountains.Feedbacks.MMF_Feedback.RequiresSetupText => "This feedback requires some additional setup."

defines the setup text that will be displayed on the feedback, should setup be required

◆ Timing

MMFeedbackTiming MoreMountains.Feedbacks.MMF_Feedback.Timing

a number of timing-related values (delay, repeat, etc)

◆ UniqueID

int MoreMountains.Feedbacks.MMF_Feedback.UniqueID

◆ UseRange

bool MoreMountains.Feedbacks.MMF_Feedback.UseRange = false

if this is true, only shakers within the specified range will respond to this feedback

◆ UseRangeFalloff

bool MoreMountains.Feedbacks.MMF_Feedback.UseRangeFalloff = false

when in UseRange mode, whether or not to modify the shake intensity based on the RangeFallOff curve

Property Documentation

◆ ComputedTimescaleMode

virtual TimescaleModes MoreMountains.Feedbacks.MMF_Feedback.ComputedTimescaleMode

get

Returns the timescale mode to use in logic, taking into account the one set at the feedback level and the player level

◆ FeedbackDeltaTime

virtual float MoreMountains.Feedbacks.MMF_Feedback.FeedbackDeltaTime

get

the delta time (or unscaled delta time) based on the selected Timing settings

◆ FeedbackDuration

virtual float MoreMountains.Feedbacks.MMF_Feedback.FeedbackDuration

getset

◆ FeedbackTime

virtual float MoreMountains.Feedbacks.MMF_Feedback.FeedbackTime

get

the time (or unscaled time) based on the selected Timing settings

◆ FinalNormalizedTime

virtual float? MoreMountains.Feedbacks.MMF_Feedback.FinalNormalizedTime

getprotected

Returns the t value at which to evaluate a curve at the end of this feedback's play time

◆ ForcedReferenceHolder

virtual MMF_ReferenceHolder MoreMountains.Feedbacks.MMF_Feedback.ForcedReferenceHolder

getset

when in forced reference mode, this will contain the forced reference holder that will be used (usually set by itself)

◆ InScaledTimescaleMode

virtual bool MoreMountains.Feedbacks.MMF_Feedback.InScaledTimescaleMode

get

returns true if this feedback is in Scaled timescale mode, false otherwise

◆ IsExpanded

virtual bool MoreMountains.Feedbacks.MMF_Feedback.IsExpanded

getset

◆ IsPlaying

virtual bool MoreMountains.Feedbacks.MMF_Feedback.IsPlaying

getset

if this is true, this feedback is currently playing

◆ NormalPlayDirection

virtual bool MoreMountains.Feedbacks.MMF_Feedback.NormalPlayDirection

get

Returns true if this feedback should play normally, or false if it should play in rewind

◆ RequiredChannelText

virtual string MoreMountains.Feedbacks.MMF_Feedback.RequiredChannelText

get

◆ ScriptDrivenPause

virtual bool MoreMountains.Feedbacks.MMF_Feedback.ScriptDrivenPause

getset

if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution

◆ ScriptDrivenPauseAutoResume

virtual float MoreMountains.Feedbacks.MMF_Feedback.ScriptDrivenPauseAutoResume

getset

if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already

◆ ShouldPlayInThisSequenceDirection

virtual bool MoreMountains.Feedbacks.MMF_Feedback.ShouldPlayInThisSequenceDirection

get

Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting

◆ TotalDuration

virtual float MoreMountains.Feedbacks.MMF_Feedback.TotalDuration

get

The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats)

The documentation for this class was generated from the following file:

Assets/CorgiEngine/ThirdParty/MoreMountains/MMFeedbacks/MMFeedbacks/Core/MMF_Player/MMF_Feedback.cs

Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Protected Attributes

Properties

Member Function Documentation

◆ ApplyDirection()

◆ ApplyTimeMultiplier()

◆ AutomateTargetAcquisition()

◆ AutomateTargetAcquisitionInternal()

◆ AutomaticShakerSetup()

◆ CacheRequiresSetup()

◆ ComputeIntensity()

◆ ComputeNewRandomDurationMultiplier()

◆ ComputeTotalDuration()

◆ CustomInitialization()

◆ CustomPlayerComplete()

◆ CustomPlayFeedback()

◆ CustomReset()

◆ CustomRestoreInitialValues()

◆ CustomSkipToTheEnd()

◆ CustomStopFeedback()

◆ EvaluateRequiresSetup()

◆ FindAutomatedTarget< T >()

◆ FindAutomatedTargetGameObject()

◆ ForceAutomateTargetAcquisition()

◆ ForceInitialValue()

◆ ForceInitialValueDelayedCo()

◆ InfinitePlay()

◆ Initialization()

◆ InitializeCustomAttributes()

◆ OnAddFeedback()

◆ OnDestroy()

◆ OnDisable()

◆ OnDrawGizmosSelectedHandler()

◆ OnValidate()

◆ Play()

◆ PlayCoroutine()

◆ PlayerComplete()

◆ PreInitialization()

◆ RegularPlay()

◆ RepeatedPlay()

◆ ResetCooldown()

◆ ResetFeedback()

◆ ResetPlayCount()

◆ RestoreInitialValues()

◆ SequenceCoroutine()

◆ SetDelayBetweenRepeats()

◆ SetFeedbackDuration()

◆ SetIndexInFeedbacksList()

◆ SetInitialDelay()

◆ SetSequence()

◆ SkipToTheEnd()

◆ Stop()

◆ TriggerCustomPlay()

◆ TriggerRepeatedPlay()

◆ WaitFor()

Member Data Documentation

◆ _automaticSetupGroupName

◆ _beatInterval

◆ _channelData

◆ _indexInOwnerFeedbackList

◆ _infinitePlayCoroutine

◆ _initialized

◆ _lastPlayTimestamp

◆ _playCoroutine

◆ _playsLeft

◆ _randomDurationMultiplier

◆ _randomnessGroupName

◆ _rangeGroupName

◆ _repeatedPlayCoroutine

◆ _repeatOffset

◆ _requiredTarget

◆ _requiredTargetTextCached

◆ _requiredTargetTextCachedExtra

◆ _requiresSetup

◆ _sequenceCoroutine

◆ _sequenceTrackID

◆ _totalDuration