this feedback will let you animate the position of More...

Inheritance diagram for MoreMountains.Feedbacks.MMF_Position:

Public Types
enum	Spaces { Spaces.World, Spaces.Local, Spaces.RectTransform, Spaces.Self }

enum	Modes { Modes.AtoB, Modes.AlongCurve, Modes.ToDestination }

enum	TimeScales { TimeScales.Scaled, TimeScales.Unscaled }

Public Member Functions
override void	OnDisable ()
	On disable we reset our coroutine More...

override void	OnValidate ()
	On Validate, we migrate our deprecated animation curves to our tween types if needed More...

Public Member Functions inherited from MoreMountains.Feedbacks.MMF_Feedback
virtual float	ComputeIntensity (float intensity, Vector3 position)
	Computes the new intensity, taking into account constant intensity and potential randomness More...

virtual void	CacheRequiresSetup ()

virtual bool	EvaluateRequiresSetup ()
	Override this method to determine if a feedback requires setup More...

virtual void	SetFeedbackDuration (float newDuration)
	Use this method to change the duration of this feedback More...

virtual void	PreInitialization (MMF_Player owner, int index)
	Runs at Awake, lets you preinitialize your custom feedback before Initialization More...

virtual void	Initialization (MMF_Player owner, int index)
	Typically runs on Start, Initializes the feedback and its timing related variables More...

virtual void	SetIndexInFeedbacksList (int index)
	Lets you specify at what index this feedback is in the list - use carefully (or don't use at all) More...

virtual void	AutomaticShakerSetup ()
	Call this method (either directly or via the inspector button) to try and automatically setup this feedback's corresponding shaker in the scene More...

virtual void	ForceAutomateTargetAcquisition ()
	Lets you force target acquisition, outside of initialization where it usually occurs More...

virtual void	Play (Vector3 position, float feedbacksIntensity=1.0f)
	Plays the feedback More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	Stop (Vector3 position, float feedbacksIntensity=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	SkipToTheEnd (Vector3 position, float feedbacksIntensity=1.0f)
	Called when skipping to the end of MMF_Player, calls custom Skip on all feedbacks More...

virtual void	ForceInitialValue (Vector3 position, float feedbacksIntensity=1.0f)
	Forces the feedback to set its initial value (behavior will change from feedback to feedback, but for example, a Position feedback that moves a Transform from point A to B would automatically move the Transform to point A when ForceInitialState is called More...

virtual void	RestoreInitialValues ()
	Called when restoring the initial state of a player, calls custom Restore on all feedbacks More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	ResetCooldown ()
	Resets the cooldown for this feedback, allowing it to be played again instantly More...

virtual void	PlayerComplete ()
	This gets called by the MMF Player when all feedbacks have completed playing More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

virtual void	ComputeNewRandomDurationMultiplier ()
	Computes a new random duration multiplier More...

virtual void	ResetPlayCount ()
	Resets the play count of this feedback More...

virtual void	ComputeTotalDuration ()
	Computes the total duration of this feedback More...

virtual void	InitializeCustomAttributes ()
	Use this method to initialize any custom attributes you may have More...

virtual void	OnAddFeedback ()
	Triggered when the feedback gets added to the player More...

virtual void	OnDestroy ()
	Triggered when that feedback gets destroyed More...

virtual void	OnDrawGizmosSelectedHandler ()
	Triggered when the host MMF Player gets selected, can be used to draw gizmos More...

Public Attributes
override bool	HasRandomness => true
	sets the inspector color for this feedback More...

override bool	CanForceInitialValue => true

override bool	HasAutomatedTargetAcquisition => true

GameObject	AnimatePositionTarget
	the object this feedback will animate the position for More...

Modes	Mode = Modes.AtoB
	the mode this animation should follow (either going from A to B, or moving along a curve) More...

Spaces	Space = Spaces.World
	the space in which to move the position in More...

bool	RandomizeRemap = false
	whether or not to randomize remap values between their base and alt values on play, useful to add some variety every time you play this feedback More...

float	AnimatePositionDuration = 0.2f
	the duration of the animation on play More...

MMTweenType	AnimatePositionTween = new MMTweenType( new AnimationCurve(new Keyframe(0, 0), new Keyframe(1, 1)), "", "Mode", (int)Modes.AtoB, (int)Modes.ToDestination)
	the MMTween curve definition to use instead of the animation curve to define the acceleration of the movement More...

float	RemapCurveZero = 0f
	the value to remap the curve's 0 value to More...

float	RemapCurveZeroAlt = 0f
	in randomize remap mode, the value to remap the curve's 0 value to (randomized between this and RemapCurveZero) More...

float	RemapCurveOne = 1f
	the value to remap the curve's 1 value to More...

float	RemapCurveOneAlt = 1f
	in randomize remap mode, the value to remap the curve's 1 value to (randomized between this and RemapCurveOne) More...

bool	AnimateX
	if this is true, the x position will be animated More...

MMTweenType	AnimatePositionTweenX = new MMTweenType(new AnimationCurve(new Keyframe(0, 0), new Keyframe(0.3f, 1f), new Keyframe(0.6f, -1f), new Keyframe(1, 0f)), "AnimateX")
	the acceleration of the movement More...

bool	AnimateY
	if this is true, the y position will be animated More...

MMTweenType	AnimatePositionTweenY = new MMTweenType(new AnimationCurve(new Keyframe(0, 0), new Keyframe(0.3f, 1f), new Keyframe(0.6f, -1f), new Keyframe(1, 0f)), "AnimateY")
	the acceleration of the movement More...

bool	AnimateZ
	if this is true, the z position will be animated More...

MMTweenType	AnimatePositionTweenZ = new MMTweenType(new AnimationCurve(new Keyframe(0, 0), new Keyframe(0.3f, 1f), new Keyframe(0.6f, -1f), new Keyframe(1, 0f)), "AnimateZ")
	the acceleration of the movement More...

bool	AllowAdditivePlays = false
	if this is true, calling that feedback will trigger it, even if it's in progress. If it's false, it'll prevent any new Play until the current one is over More...

bool	RelativePosition = true
	if this is true, movement will be relative to the object's initial position. So moving its y position along a curve going from 0 to 1 will move it up one unit. If this is false, in that same example, it'll be moved from 0 to 1 in absolute coordinates. More...

bool	DeterminePositionsOnPlay = false
	if this is true, initial and destination positions will be recomputed on every play More...

Vector3	InitialPosition = Vector3.zero
	the initial position More...

Vector3	DestinationPosition = Vector3.one
	the destination position More...

Transform	InitialPositionTransform
	the initial transform - if set, takes precedence over the Vector3 above More...

Transform	DestinationPositionTransform
	the destination transform - if set, takes precedence over the Vector3 above More...

AnimationCurve	AnimatePositionCurveX = null
	[DEPRECATED] the acceleration of the movement More...

AnimationCurve	AnimatePositionCurveY = null
	[DEPRECATED] the acceleration of the movement More...

AnimationCurve	AnimatePositionCurveZ = null
	[DEPRECATED] the acceleration of the movement More...

AnimationCurve	AnimatePositionCurve = null
	[DEPRECATED] the acceleration of the movement - this is not used anymore, replaced by the AnimatePositionTween More...

Public Attributes inherited from MoreMountains.Feedbacks.MMF_Feedback
bool	Active = true
	whether or not this feedback is active More...

int	UniqueID

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

string	OriginalLabel = ""
	the original label of this feedback, used to display next to the custom label in case we set one More...

MMChannelModes	ChannelMode = MMChannelModes.Int

int	Channel = 0
	the ID of the channel on which this feedback will communicate More...

MMChannel	MMChannelDefinition = null

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

virtual Color	DisplayColor => Color.black
	use this color to customize the background color of the feedback in the MMF_Player's list More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

MMFeedbackTargetAcquisition	AutomatedTargetAcquisition
	a set of settings letting you define automated target acquisition for this feedback, to (for example) automatically grab the target on this game object, or a parent, a child, or on a reference holder More...

bool	RandomizeOutput = false
	if this is true, intensity will be multiplied by a random value on play, picked between RandomMultiplier.x and RandomMultiplier.y More...

Vector2	RandomMultiplier = new Vector2(0.8f, 1f)
	a random value (randomized between its x and y) by which to multiply the output of this feedback, if RandomizeOutput is true More...

bool	RandomizeDuration = false
	if this is true, this feedback's duration will be multiplied by a random value on play, picked between RandomDurationMultiplier.x and RandomDurationMultiplier.y More...

Vector2	RandomDurationMultiplier = new Vector2(0.5f, 2f)
	a random value (randomized between its x and y) by which to multiply the duration of this feedback, if RandomizeDuration is true More...

bool	UseRange = false
	if this is true, only shakers within the specified range will respond to this feedback More...

float	RangeDistance = 5f
	when in UseRange mode, only shakers within that distance will respond to this feedback More...

bool	UseRangeFalloff = false
	when in UseRange mode, whether or not to modify the shake intensity based on the RangeFallOff curve More...

AnimationCurve	RangeFalloff = new AnimationCurve(new Keyframe(0f, 1f), new Keyframe(1f, 0f))
	the animation curve to use to define falloff (on the x 0 represents the range center, 1 represents the max distance to it) More...

Vector2	RemapRangeFalloff = new Vector2(0f, 1f)
	the values to remap the falloff curve's y axis' 0 and 1 More...

MMF_Button	AutomaticShakerSetupButton
	a button used to attempt an auto shaker setup for this feedback, adding whatever shaker it requires to function to the scene More...

MMF_Player	Owner
	the Owner of the feedback, as defined when calling the Initialization method More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

virtual IEnumerator	Pause => null
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause => false
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause => false
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	LooperStart => false
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	HasChannel => false
	if this is true, the Channel property will be displayed, otherwise it'll be hidden More...

virtual bool	HasAutomaticShakerSetup => false
	if this is true, this feedback will display an automatic shaker setup button More...

virtual bool	HasRandomness => false
	if this is true, the Randomness group will be displayed, otherwise it'll be hidden More...

virtual bool	CanForceInitialValue => false
	if this is true, this feedback implements ForceInitialState, otherwise calling that method will have no effect More...

virtual bool	ForceInitialValueDelayed => false
	if this is true, force initial value will happen over two frames More...

virtual bool	HasAutomatedTargetAcquisition => false
	whether or not this feedback can automatically grab the target on this game object, or a parent, a child, or on a reference holder More...

virtual bool	HasRange => false
	if this is true, the Range group will be displayed, otherwise it'll be hidden More...

virtual int	PlaysLeft => _playsLeft
	the total amount of plays this feedback has left More...

virtual bool	HasCustomInspectors => false

virtual bool	InCooldown
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

virtual float	ComputedRandomMultiplier
	Returns the random multiplier to apply to this feedback's output More...

virtual bool	RequiresSetup => _requiresSetup
	A flag used to determine if a feedback has all it needs, or if it requires some extra setup. This flag will be used to display a warning icon in the inspector if the feedback is not ready to be played. More...

virtual string	RequiredTarget => _requiredTarget

virtual bool	DrawGroupInspectors => true
	if this is true, group inspectors will be displayed within this feedback More...

virtual bool	DisplayFullHeaderColor => false
	if this is true, the feedback will be displayed in the MMF Player's list with a full color background, as opposed to just a small line on the left More...

virtual string	RequiresSetupText => "This feedback requires some additional setup."
	defines the setup text that will be displayed on the feedback, should setup be required More...

virtual string	RequiredTargetText => ""
	the text used to describe the required target More...

virtual string	RequiredTargetTextExtra => ""
	the text used to describe the required target, if more info is needed More...

virtual float	FeedbackStartedAt => Application.isPlaying ? _lastPlayTimestamp : -1f

virtual bool	FeedbackPlaying
	whether or not this feedback is playing right now More...

virtual MMChannelData	ChannelData => _channelData.Set(ChannelMode, Channel, MMChannelDefinition)
	a ChannelData object, ready to pass to an event More...

Static Public Attributes
static bool	FeedbackTypeAuthorized = true
	a static bool used to disable all feedbacks of this type at once More...

Static Public Attributes inherited from MoreMountains.Feedbacks.MMF_Feedback
const string	_randomnessGroupName = "Feedback Randomness"

const string	_rangeGroupName = "Feedback Range"

const string	_automaticSetupGroupName = "Automatic Setup"

Protected Member Functions
override void	AutomateTargetAcquisition ()
	A method meant to be implemented per feedback letting you specify what happens (usually setting a target) More...

override void	CustomInitialization (MMF_Player owner)
	On init, we set our initial and destination positions (transform will take precedence over vector3s) More...

virtual void	DeterminePositions ()

override void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On Play, we move our object from A to B More...

virtual IEnumerator	MoveAlongCurve (GameObject movingObject, Vector3 initialPosition, float duration, float intensityMultiplier)
	Moves the object along a curve More...

virtual void	ComputeNewCurvePosition (GameObject movingObject, Vector3 initialPosition, float percent, float intensityMultiplier)
	Evaluates the position curves and computes the new position More...

virtual IEnumerator	MoveFromTo (GameObject movingObject, Vector3 pointA, Vector3 pointB, float duration, MMTweenType tweenType)
	Moves an object from point A to point B in a given time More...

virtual Vector3	GetPosition (Transform target)
	Gets the world, local or anchored position More...

virtual void	SetPosition (Transform target, Vector3 newPosition)
	Sets the position, localposition or anchoredposition of the target More...

override void	CustomStopFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On stop, we interrupt movement if it was active More...

override void	CustomRestoreInitialValues ()
	On restore, we put our object back at its initial position More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMF_Feedback
virtual void	AutomateTargetAcquisitionInternal ()
	Performs automated target acquisition, if needed More...

virtual GameObject	FindAutomatedTargetGameObject ()

virtual T	FindAutomatedTarget< T > ()

virtual IEnumerator	PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Triggers delaying coroutines if needed More...

virtual void	TriggerCustomPlay (Vector3 position, float intensity)
	Triggers a custom play More...

virtual IEnumerator	InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	TriggerRepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)

virtual IEnumerator	SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual IEnumerator	ForceInitialValueDelayedCo (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to delay the Stop when forcing initial values (used mostly with shaker based feedbacks) More...

virtual float	ApplyTimeMultiplier (float duration)
	Applies the host MMFeedbacks' time multiplier to this feedback More...

virtual IEnumerator	WaitFor (float delay)
	Internal method used to wait for a duration, on scaled or unscaled time More...

virtual float	ApplyDirection (float normalizedTime)
	Returns a new value of the normalized time based on the current play direction of this feedback More...

virtual void	CustomSkipToTheEnd (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets skipped to the end More...

virtual void	CustomPlayerComplete ()
	This method describes what happens when the player this feedback belongs to completes playing More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Protected Attributes
Vector3	_newPosition

Vector3	_currentPosition

RectTransform	_rectTransform

Vector3	_initialPosition

Vector3	_destinationPosition

Coroutine	_coroutine

Vector3	_workInitialPosition

Vector3	_workDestinationPosition

float	_remapCurveZero

float	_remapCurveOne

Protected Attributes inherited from MoreMountains.Feedbacks.MMF_Feedback
float	_lastPlayTimestamp = -float.MaxValue

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

bool	_requiresSetup = false

string	_requiredTarget = ""

float	_randomDurationMultiplier = 1f

int	_sequenceTrackID = 0

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

MMChannelData	_channelData

float	_totalDuration = 0f

int	_indexInOwnerFeedbackList = 0

string	_requiredTargetTextCached = "."

string	_requiredTargetTextCachedExtra = ""

float	_repeatOffset = 0f

Properties
override float	FeedbackDuration `[get, set]`
	the duration of this feedback is the duration of its animation More...

Properties inherited from MoreMountains.Feedbacks.MMF_Feedback
virtual bool	ScriptDrivenPause `[get, set]`
	if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...

virtual float	ScriptDrivenPauseAutoResume `[get, set]`
	if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...

virtual MMF_ReferenceHolder	ForcedReferenceHolder `[get, set]`
	when in forced reference mode, this will contain the forced reference holder that will be used (usually set by itself) More...

virtual bool	IsPlaying `[get, set]`
	if this is true, this feedback is currently playing More...

virtual TimescaleModes	ComputedTimescaleMode `[get]`
	Returns the timescale mode to use in logic, taking into account the one set at the feedback level and the player level More...

virtual bool	InScaledTimescaleMode `[get]`
	returns true if this feedback is in Scaled timescale mode, false otherwise More...

virtual float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

virtual float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

virtual float	TotalDuration `[get]`
	The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats) More...

virtual bool	IsExpanded `[get, set]`

virtual string	RequiredChannelText `[get]`

virtual float	FeedbackDuration `[get, set]`

virtual float?	FinalNormalizedTime `[get]`
	Returns the t value at which to evaluate a curve at the end of this feedback's play time More...

virtual bool	NormalPlayDirection `[get]`
	Returns true if this feedback should play normally, or false if it should play in rewind More...

virtual bool	ShouldPlayInThisSequenceDirection `[get]`
	Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...

Detailed Description

this feedback will let you animate the position of

Member Enumeration Documentation

◆ Modes

enum MoreMountains.Feedbacks.MMF_Position.Modes

strong

Enumerator
AtoB
AlongCurve
ToDestination

◆ Spaces

enum MoreMountains.Feedbacks.MMF_Position.Spaces

strong

Enumerator
World
Local
RectTransform
Self

◆ TimeScales

enum MoreMountains.Feedbacks.MMF_Position.TimeScales

strong

Enumerator
Scaled
Unscaled

Member Function Documentation

◆ AutomateTargetAcquisition()

override void MoreMountains.Feedbacks.MMF_Position.AutomateTargetAcquisition ( )

protectedvirtual

A method meant to be implemented per feedback letting you specify what happens (usually setting a target)

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ ComputeNewCurvePosition()

virtual void MoreMountains.Feedbacks.MMF_Position.ComputeNewCurvePosition	(	GameObject	movingObject,
		Vector3	initialPosition,
		float	percent,
		float	intensityMultiplier
	)

protectedvirtual

Evaluates the position curves and computes the new position

Parameters

movingObject
initialPosition
percent

◆ CustomInitialization()

override void MoreMountains.Feedbacks.MMF_Position.CustomInitialization ( MMF_Player owner )

protectedvirtual

On init, we set our initial and destination positions (transform will take precedence over vector3s)

Parameters

owner

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMF_Position.CustomPlayFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On Play, we move our object from A to B

Parameters

position
feedbacksIntensity

Implements MoreMountains.Feedbacks.MMF_Feedback.

◆ CustomRestoreInitialValues()

override void MoreMountains.Feedbacks.MMF_Position.CustomRestoreInitialValues ( )

protectedvirtual

On restore, we put our object back at its initial position

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ CustomStopFeedback()

override void MoreMountains.Feedbacks.MMF_Position.CustomStopFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On stop, we interrupt movement if it was active

Parameters

position
feedbacksIntensity

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ DeterminePositions()

virtual void MoreMountains.Feedbacks.MMF_Position.DeterminePositions ( )

protectedvirtual

◆ GetPosition()

virtual Vector3 MoreMountains.Feedbacks.MMF_Position.GetPosition ( Transform target )

protectedvirtual

Gets the world, local or anchored position

Parameters

target

Returns

◆ MoveAlongCurve()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Position.MoveAlongCurve	(	GameObject	movingObject,
		Vector3	initialPosition,
		float	duration,
		float	intensityMultiplier
	)

protectedvirtual

Moves the object along a curve

Parameters

movingObject
pointA
pointB
duration
curve

Returns

◆ MoveFromTo()

virtual IEnumerator MoreMountains.Feedbacks.MMF_Position.MoveFromTo	(	GameObject	movingObject,
		Vector3	pointA,
		Vector3	pointB,
		float	duration,
		MMTweenType	tweenType
	)

protectedvirtual

Moves an object from point A to point B in a given time

Parameters

movingObject	Moving object.
pointA	Point a.
pointB	Point b.
duration	Time.

◆ OnDisable()

override void MoreMountains.Feedbacks.MMF_Position.OnDisable ( )

virtual

On disable we reset our coroutine

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ OnValidate()

override void MoreMountains.Feedbacks.MMF_Position.OnValidate ( )

virtual

On Validate, we migrate our deprecated animation curves to our tween types if needed

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ SetPosition()

virtual void MoreMountains.Feedbacks.MMF_Position.SetPosition	(	Transform	target,
		Vector3	newPosition
	)

protectedvirtual

Sets the position, localposition or anchoredposition of the target

Parameters

target
newPosition

Member Data Documentation

◆ _coroutine

Coroutine MoreMountains.Feedbacks.MMF_Position._coroutine

protected

◆ _currentPosition

Vector3 MoreMountains.Feedbacks.MMF_Position._currentPosition

protected

◆ _destinationPosition

Vector3 MoreMountains.Feedbacks.MMF_Position._destinationPosition

protected

◆ _initialPosition

Vector3 MoreMountains.Feedbacks.MMF_Position._initialPosition

protected

◆ _newPosition

Vector3 MoreMountains.Feedbacks.MMF_Position._newPosition

protected

◆ _rectTransform

RectTransform MoreMountains.Feedbacks.MMF_Position._rectTransform

protected

◆ _remapCurveOne

float MoreMountains.Feedbacks.MMF_Position._remapCurveOne

protected

◆ _remapCurveZero

float MoreMountains.Feedbacks.MMF_Position._remapCurveZero

protected

◆ _workDestinationPosition

Vector3 MoreMountains.Feedbacks.MMF_Position._workDestinationPosition

protected

◆ _workInitialPosition

Vector3 MoreMountains.Feedbacks.MMF_Position._workInitialPosition

protected

◆ AllowAdditivePlays

bool MoreMountains.Feedbacks.MMF_Position.AllowAdditivePlays = false

if this is true, calling that feedback will trigger it, even if it's in progress. If it's false, it'll prevent any new Play until the current one is over

◆ AnimatePositionCurve

AnimationCurve MoreMountains.Feedbacks.MMF_Position.AnimatePositionCurve = null

[DEPRECATED] the acceleration of the movement - this is not used anymore, replaced by the AnimatePositionTween

◆ AnimatePositionCurveX

AnimationCurve MoreMountains.Feedbacks.MMF_Position.AnimatePositionCurveX = null

[DEPRECATED] the acceleration of the movement

◆ AnimatePositionCurveY

AnimationCurve MoreMountains.Feedbacks.MMF_Position.AnimatePositionCurveY = null

[DEPRECATED] the acceleration of the movement

◆ AnimatePositionCurveZ

AnimationCurve MoreMountains.Feedbacks.MMF_Position.AnimatePositionCurveZ = null

[DEPRECATED] the acceleration of the movement

◆ AnimatePositionDuration

float MoreMountains.Feedbacks.MMF_Position.AnimatePositionDuration = 0.2f

the duration of the animation on play

◆ AnimatePositionTarget

GameObject MoreMountains.Feedbacks.MMF_Position.AnimatePositionTarget

the object this feedback will animate the position for

◆ AnimatePositionTween

MMTweenType MoreMountains.Feedbacks.MMF_Position.AnimatePositionTween = new MMTweenType( new AnimationCurve(new Keyframe(0, 0), new Keyframe(1, 1)), "", "Mode", (int)Modes.AtoB, (int)Modes.ToDestination)

the MMTween curve definition to use instead of the animation curve to define the acceleration of the movement

◆ AnimatePositionTweenX

MMTweenType MoreMountains.Feedbacks.MMF_Position.AnimatePositionTweenX = new MMTweenType(new AnimationCurve(new Keyframe(0, 0), new Keyframe(0.3f, 1f), new Keyframe(0.6f, -1f), new Keyframe(1, 0f)), "AnimateX")

the acceleration of the movement

◆ AnimatePositionTweenY

MMTweenType MoreMountains.Feedbacks.MMF_Position.AnimatePositionTweenY = new MMTweenType(new AnimationCurve(new Keyframe(0, 0), new Keyframe(0.3f, 1f), new Keyframe(0.6f, -1f), new Keyframe(1, 0f)), "AnimateY")

the acceleration of the movement

◆ AnimatePositionTweenZ

MMTweenType MoreMountains.Feedbacks.MMF_Position.AnimatePositionTweenZ = new MMTweenType(new AnimationCurve(new Keyframe(0, 0), new Keyframe(0.3f, 1f), new Keyframe(0.6f, -1f), new Keyframe(1, 0f)), "AnimateZ")

the acceleration of the movement

◆ AnimateX

bool MoreMountains.Feedbacks.MMF_Position.AnimateX

if this is true, the x position will be animated

◆ AnimateY

bool MoreMountains.Feedbacks.MMF_Position.AnimateY

if this is true, the y position will be animated

◆ AnimateZ

bool MoreMountains.Feedbacks.MMF_Position.AnimateZ

if this is true, the z position will be animated

◆ CanForceInitialValue

override bool MoreMountains.Feedbacks.MMF_Position.CanForceInitialValue => true

◆ DestinationPosition

Vector3 MoreMountains.Feedbacks.MMF_Position.DestinationPosition = Vector3.one

the destination position

◆ DestinationPositionTransform

Transform MoreMountains.Feedbacks.MMF_Position.DestinationPositionTransform

the destination transform - if set, takes precedence over the Vector3 above

◆ DeterminePositionsOnPlay

bool MoreMountains.Feedbacks.MMF_Position.DeterminePositionsOnPlay = false

if this is true, initial and destination positions will be recomputed on every play

◆ FeedbackTypeAuthorized

bool MoreMountains.Feedbacks.MMF_Position.FeedbackTypeAuthorized = true

static

a static bool used to disable all feedbacks of this type at once

◆ HasAutomatedTargetAcquisition

override bool MoreMountains.Feedbacks.MMF_Position.HasAutomatedTargetAcquisition => true

◆ HasRandomness

override bool MoreMountains.Feedbacks.MMF_Position.HasRandomness => true

sets the inspector color for this feedback

◆ InitialPosition

Vector3 MoreMountains.Feedbacks.MMF_Position.InitialPosition = Vector3.zero

the initial position

◆ InitialPositionTransform

Transform MoreMountains.Feedbacks.MMF_Position.InitialPositionTransform

the initial transform - if set, takes precedence over the Vector3 above

◆ Mode

Modes MoreMountains.Feedbacks.MMF_Position.Mode = Modes.AtoB

the mode this animation should follow (either going from A to B, or moving along a curve)

◆ RandomizeRemap

bool MoreMountains.Feedbacks.MMF_Position.RandomizeRemap = false

whether or not to randomize remap values between their base and alt values on play, useful to add some variety every time you play this feedback

◆ RelativePosition

bool MoreMountains.Feedbacks.MMF_Position.RelativePosition = true

if this is true, movement will be relative to the object's initial position. So moving its y position along a curve going from 0 to 1 will move it up one unit. If this is false, in that same example, it'll be moved from 0 to 1 in absolute coordinates.

◆ RemapCurveOne

float MoreMountains.Feedbacks.MMF_Position.RemapCurveOne = 1f

the value to remap the curve's 1 value to

◆ RemapCurveOneAlt

float MoreMountains.Feedbacks.MMF_Position.RemapCurveOneAlt = 1f

in randomize remap mode, the value to remap the curve's 1 value to (randomized between this and RemapCurveOne)

◆ RemapCurveZero

float MoreMountains.Feedbacks.MMF_Position.RemapCurveZero = 0f

the value to remap the curve's 0 value to

◆ RemapCurveZeroAlt

float MoreMountains.Feedbacks.MMF_Position.RemapCurveZeroAlt = 0f

in randomize remap mode, the value to remap the curve's 0 value to (randomized between this and RemapCurveZero)

◆ Space

Spaces MoreMountains.Feedbacks.MMF_Position.Space = Spaces.World

the space in which to move the position in

Property Documentation

◆ FeedbackDuration

override float MoreMountains.Feedbacks.MMF_Position.FeedbackDuration

getset

the duration of this feedback is the duration of its animation

The documentation for this class was generated from the following file:

Assets/CorgiEngine/ThirdParty/MoreMountains/MMFeedbacks/MMFeedbacks/Feedbacks/MMF_Position.cs

Public Types

Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Protected Attributes

Properties

Detailed Description

Member Enumeration Documentation

◆ Modes

◆ Spaces

◆ TimeScales

Member Function Documentation

◆ AutomateTargetAcquisition()

◆ ComputeNewCurvePosition()

◆ CustomInitialization()

◆ CustomPlayFeedback()

◆ CustomRestoreInitialValues()

◆ CustomStopFeedback()

◆ DeterminePositions()

◆ GetPosition()

◆ MoveAlongCurve()

◆ MoveFromTo()

◆ OnDisable()

◆ OnValidate()

◆ SetPosition()

Member Data Documentation

◆ _coroutine

◆ _currentPosition

◆ _destinationPosition

◆ _initialPosition

◆ _newPosition

◆ _rectTransform

◆ _remapCurveOne

◆ _remapCurveZero

◆ _workDestinationPosition

◆ _workInitialPosition

◆ AllowAdditivePlays

◆ AnimatePositionCurve

◆ AnimatePositionCurveX

◆ AnimatePositionCurveY

◆ AnimatePositionCurveZ

◆ AnimatePositionDuration

◆ AnimatePositionTarget

◆ AnimatePositionTween

◆ AnimatePositionTweenX

◆ AnimatePositionTweenY

◆ AnimatePositionTweenZ

◆ AnimateX

◆ AnimateY

◆ AnimateZ

◆ CanForceInitialValue

◆ DestinationPosition

◆ DestinationPositionTransform

◆ DeterminePositionsOnPlay

◆ FeedbackTypeAuthorized

◆ HasAutomatedTargetAcquisition

◆ HasRandomness

◆ InitialPosition

◆ InitialPositionTransform

◆ Mode

◆ RandomizeRemap

◆ RelativePosition

◆ RemapCurveOne

◆ RemapCurveOneAlt

◆ RemapCurveZero

◆ RemapCurveZeroAlt

◆ Space

Property Documentation

◆ FeedbackDuration