Add this component to an object and you'll be able to define a path, that can then be used by another component More...

Inheritance diagram for MoreMountains.Tools.MMPath:

Classes
struct	Data
	A data structure More...

Public Types
enum	CycleOptions { CycleOptions.BackAndForth, CycleOptions.Loop, CycleOptions.OnlyOnce }
	the possible cycle options More...

enum	MovementDirection { MovementDirection.Ascending, MovementDirection.Descending }
	the possible movement directions More...

Public Member Functions
virtual void	Initialization ()
	Flag inits, initial movement determination, and object positioning More...

int	CurrentIndex ()

Vector3	CurrentPoint ()

Vector3	CurrentPositionRelative ()

virtual IEnumerator< Vector3 >	GetPathEnumerator ()
	Returns the current target point in the path More...

virtual void	ChangeDirection ()
	Call this method to force a change in direction at any time More...

virtual void	UpdateOriginalTransformPosition (Vector3 newOriginalTransformPosition)
	Updates the original transform position. More...

virtual Vector3	GetOriginalTransformPosition ()
	Gets the original transform position. More...

virtual void	SetOriginalTransformPositionStatus (bool status)
	Sets the original transform position status. More...

virtual bool	GetOriginalTransformPositionStatus ()
	Gets the original transform position status. More...

void	SetPath (in Data configuration)
	Replaces this MMPath's settings with the ones passed in parameters More...

Public Attributes
CycleOptions	CycleOption

MovementDirection	LoopInitialMovementDirection = MovementDirection.Ascending
	the initial movement direction : ascending > will go from the points 0 to 1, 2, etc ; descending > will go from the last point to last-1, last-2, etc More...

List< MMPathMovementElement >	PathElements
	the points that make up the path the object will follow More...

MMPath	ReferenceMMPath
	another MMPath that you can reference. If set, the reference MMPath's data will replace this MMPath's More...

bool	AbsoluteReferencePath = false
	if this is true, this object will move to the 0 position of the reference path More...

float	MinDistanceToGoal = .1f
	the minimum distance to a point at which we'll arbitrarily decide the point's been reached More...

bool	EndReached => _endReached
	if this is true, the path has reached its end More...

bool	LockHandlesOnXAxis = false

bool	LockHandlesOnYAxis = false

bool	LockHandlesOnZAxis = false

virtual int	Direction => _direction

Protected Member Functions
virtual void	Start ()
	Initialization More...

virtual void	Update ()
	On update we keep moving along the path More...

virtual void	ComputePath ()
	Moves the object and determines when a point has been reached More...

virtual void	OnDrawGizmos ()
	On DrawGizmos, we draw lines to show the path the object will follow More...

Protected Attributes
Vector3	_originalTransformPosition
	the original position of the transform, hidden and shouldn't be accessed More...

bool	_originalTransformPositionStatus =false
	internal flag, hidden and shouldn't be accessed More...

bool	_active =false

IEnumerator< Vector3 >	_currentPoint

int	_direction = 1

Vector3	_initialPosition

Vector3	_initialPositionThisFrame

Vector3	_finalPosition

Vector3	_previousPoint = Vector3.zero

int	_currentIndex

float	_distanceToNextPoint

bool	_endReached = false

Properties
virtual bool	CanMove `[get, set]`
	if this is true, the object can move along the path More...

virtual bool	Initialized `[get, set]`
	if this is true, this path has gone through its Initialization method More...

Detailed Description

Add this component to an object and you'll be able to define a path, that can then be used by another component

Member Enumeration Documentation

◆ CycleOptions

enum MoreMountains.Tools.MMPath.CycleOptions

strong

the possible cycle options

Enumerator
BackAndForth
Loop
OnlyOnce

◆ MovementDirection

enum MoreMountains.Tools.MMPath.MovementDirection

strong

the possible movement directions

Enumerator
Ascending
Descending

Member Function Documentation

◆ ChangeDirection()

virtual void MoreMountains.Tools.MMPath.ChangeDirection ( )

virtual

Call this method to force a change in direction at any time

◆ ComputePath()

virtual void MoreMountains.Tools.MMPath.ComputePath ( )

protectedvirtual

Moves the object and determines when a point has been reached

◆ CurrentIndex()

int MoreMountains.Tools.MMPath.CurrentIndex ( )

◆ CurrentPoint()

Vector3 MoreMountains.Tools.MMPath.CurrentPoint ( )

◆ CurrentPositionRelative()

Vector3 MoreMountains.Tools.MMPath.CurrentPositionRelative ( )

◆ GetOriginalTransformPosition()

virtual Vector3 MoreMountains.Tools.MMPath.GetOriginalTransformPosition ( )

virtual

Gets the original transform position.

Returns: The original transform position.

◆ GetOriginalTransformPositionStatus()

virtual bool MoreMountains.Tools.MMPath.GetOriginalTransformPositionStatus ( )

virtual

Gets the original transform position status.

Returns: true, if original transform position status was gotten, false otherwise.

◆ GetPathEnumerator()

virtual IEnumerator<Vector3> MoreMountains.Tools.MMPath.GetPathEnumerator ( )

virtual

Returns the current target point in the path

Returns: The path enumerator.

◆ Initialization()

virtual void MoreMountains.Tools.MMPath.Initialization ( )

virtual

Flag inits, initial movement determination, and object positioning

◆ OnDrawGizmos()

virtual void MoreMountains.Tools.MMPath.OnDrawGizmos ( )

protectedvirtual

On DrawGizmos, we draw lines to show the path the object will follow

◆ SetOriginalTransformPositionStatus()

virtual void MoreMountains.Tools.MMPath.SetOriginalTransformPositionStatus ( bool status )

virtual

Sets the original transform position status.

Parameters

status If set to true status.

◆ SetPath()

void MoreMountains.Tools.MMPath.SetPath ( in Data configuration )

Replaces this MMPath's settings with the ones passed in parameters

Parameters

configuration

◆ Start()

virtual void MoreMountains.Tools.MMPath.Start ( )

protectedvirtual

Initialization

◆ Update()

virtual void MoreMountains.Tools.MMPath.Update ( )

protectedvirtual

On update we keep moving along the path

◆ UpdateOriginalTransformPosition()

virtual void MoreMountains.Tools.MMPath.UpdateOriginalTransformPosition ( Vector3 newOriginalTransformPosition )

virtual

Updates the original transform position.

Parameters

newOriginalTransformPosition New original transform position.

Member Data Documentation

◆ _active

bool MoreMountains.Tools.MMPath._active =false

protected

◆ _currentIndex

int MoreMountains.Tools.MMPath._currentIndex

protected

◆ _currentPoint

IEnumerator<Vector3> MoreMountains.Tools.MMPath._currentPoint

protected

◆ _direction

int MoreMountains.Tools.MMPath._direction = 1

protected

◆ _distanceToNextPoint

float MoreMountains.Tools.MMPath._distanceToNextPoint

protected

◆ _endReached

bool MoreMountains.Tools.MMPath._endReached = false

protected

◆ _finalPosition

Vector3 MoreMountains.Tools.MMPath._finalPosition

protected

◆ _initialPosition

Vector3 MoreMountains.Tools.MMPath._initialPosition

protected

◆ _initialPositionThisFrame

Vector3 MoreMountains.Tools.MMPath._initialPositionThisFrame

protected

◆ _originalTransformPosition

Vector3 MoreMountains.Tools.MMPath._originalTransformPosition

protected

the original position of the transform, hidden and shouldn't be accessed

◆ _originalTransformPositionStatus

bool MoreMountains.Tools.MMPath._originalTransformPositionStatus =false

protected

internal flag, hidden and shouldn't be accessed

◆ _previousPoint

Vector3 MoreMountains.Tools.MMPath._previousPoint = Vector3.zero

protected

◆ AbsoluteReferencePath

bool MoreMountains.Tools.MMPath.AbsoluteReferencePath = false

if this is true, this object will move to the 0 position of the reference path

◆ CycleOption

CycleOptions MoreMountains.Tools.MMPath.CycleOption

◆ Direction

virtual int MoreMountains.Tools.MMPath.Direction => _direction

◆ EndReached

bool MoreMountains.Tools.MMPath.EndReached => _endReached

if this is true, the path has reached its end

◆ LockHandlesOnXAxis

bool MoreMountains.Tools.MMPath.LockHandlesOnXAxis = false

◆ LockHandlesOnYAxis

bool MoreMountains.Tools.MMPath.LockHandlesOnYAxis = false

◆ LockHandlesOnZAxis

bool MoreMountains.Tools.MMPath.LockHandlesOnZAxis = false

◆ LoopInitialMovementDirection

MovementDirection MoreMountains.Tools.MMPath.LoopInitialMovementDirection = MovementDirection.Ascending

the initial movement direction : ascending > will go from the points 0 to 1, 2, etc ; descending > will go from the last point to last-1, last-2, etc

◆ MinDistanceToGoal

float MoreMountains.Tools.MMPath.MinDistanceToGoal = .1f

the minimum distance to a point at which we'll arbitrarily decide the point's been reached

◆ PathElements

List<MMPathMovementElement> MoreMountains.Tools.MMPath.PathElements

the points that make up the path the object will follow

◆ ReferenceMMPath

MMPath MoreMountains.Tools.MMPath.ReferenceMMPath

another MMPath that you can reference. If set, the reference MMPath's data will replace this MMPath's

Property Documentation

◆ CanMove

virtual bool MoreMountains.Tools.MMPath.CanMove

getset

if this is true, the object can move along the path

◆ Initialized

virtual bool MoreMountains.Tools.MMPath.Initialized

getset

if this is true, this path has gone through its Initialization method

The documentation for this class was generated from the following file:

Assets/CorgiEngine/ThirdParty/MoreMountains/MMTools/Accessories/MMMovement/MMPathMovement/MMPath.cs

Classes

Public Types

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Properties

Detailed Description

Member Enumeration Documentation

◆ CycleOptions

◆ MovementDirection

Member Function Documentation

◆ ChangeDirection()

◆ ComputePath()

◆ CurrentIndex()

◆ CurrentPoint()

◆ CurrentPositionRelative()

◆ GetOriginalTransformPosition()

◆ GetOriginalTransformPositionStatus()

◆ GetPathEnumerator()

◆ Initialization()

◆ OnDrawGizmos()

◆ SetOriginalTransformPositionStatus()

◆ SetPath()

◆ Start()

◆ Update()

◆ UpdateOriginalTransformPosition()

Member Data Documentation

◆ _active

◆ _currentIndex

◆ _currentPoint

◆ _direction

◆ _distanceToNextPoint

◆ _endReached

◆ _finalPosition

◆ _initialPosition

◆ _initialPositionThisFrame

◆ _originalTransformPosition

◆ _originalTransformPositionStatus

◆ _previousPoint

◆ AbsoluteReferencePath

◆ CycleOption

◆ Direction

◆ EndReached

◆ LockHandlesOnXAxis

◆ LockHandlesOnYAxis

◆ LockHandlesOnZAxis

◆ LoopInitialMovementDirection

◆ MinDistanceToGoal

◆ PathElements

◆ ReferenceMMPath

Property Documentation

◆ CanMove

◆ Initialized